On a small backsplash every shifted joint is visible. Agree the height, sockets and countertop edge before ordering tile.
Measure and lay out
Measure between worktop and wall cabinets at several points. Mark sockets, hood, windows and exposed edges. Ask for a row plan: centring a pattern may require more cuts than area alone suggests.
Base and junctions
The wall must be sound and reasonably flat. Near the sink, detail the joint with the counter and splash protection. A qualified electrician handles socket wiring; the tiler cuts the facing at agreed positions.
Quote and handover
Clarify whether removal, wall preparation, tile, adhesive, holes, grout, edge trims and sealant are included. A small job may have a minimum call-out, so compare total prices rather than only a rate per square metre.
Send these details
- Width and height at several points.
- Photos of sockets, exposed edges and worktop.
- Tile size, pattern and quantity.
- Whether old facing must be removed.
Frequently asked
Can a backsplash be tiled after the kitchen is installed?
Usually, if there is access and the cabinets are protected. The exact sequence depends on cabinet height and the countertop junction.
Who moves electrical sockets?
Electrical changes belong to a qualified electrician. The tiler only cuts the facing for agreed positions.
Is silicone needed at the worktop?
The junction must resist splashes and allow movement between surfaces. Choose sealant compatible with the worktop material.